SY-405 Electroless Nickel (High Phosphorus)

SY-405 electroless nickel (high-phosphorus) is suitable for metal products that demand high coating hardness and excellent corrosion resistance; the post‑plating hardness is slightly higher than that of medium‑phosphorus electroless nickel. The coating is dense (amorphous), with outstanding magnetic shielding and superior acid‑corrosion resistance, and its hardness can reach 1200 HV after heat treatment.

SY-404 Electroless Nickel (Medium Phosphorus)

SY-404 electroless nickel (medium‑phosphorus) boasts high stability, easy management, and convenient operation. The coating is a medium‑phosphorus deposit containing 6–8% phosphorus, characterized by its dense, smooth surface and excellent corrosion resistance. It contains no toxic metals, fully complying with the RoHS directive. This product is ideally suited for decorative, anti‑corrosion, and wear‑resistant plating on metal parts where heavy‑metal‑free coatings are required, and it has been certified to international SGS standards, meeting food‑ and pharmaceutical‑grade specifications.

SY-403 Alkaline Chemical Nickel

SY-403 alkaline electroless nickel is an electroless nickel plating solution used for treating aluminum alloys prior to electroless nickel or electroplating. This alkaline electroless nickel process deposits a very thin, uniform, and highly active nickel coating, which can subsequently be followed by well‑adhering electroless nickel, electroless copper, or bright nickel electroplating. SY-403 is supplied as three concentrated liquids: Alkaline Electroless Nickel A and Alkaline Electroless Nickel C are used as tank‑start additives, while Alkaline Electroless Nickel B is used in combination with Alkaline Electroless Nickel C as a replenishment additive. An alkaline electroless nickel stabilizer is available for use when the working solution is subjected to irregular conditions.

SY-402 Tetravalent Zinc Plating

SY-402 quaternary zinc‑immersion plating solution is a high‑performance formulation that deposits a premium zinc coating on the surfaces of various aluminum alloys and castings, such as computer hard disk drives. Unlike conventional immersion zinc baths, SY‑402 produces a uniform, thin, dense, and finely grained zinc layer with minimal etching of the aluminum substrate. It also exhibits excellent adhesion to subsequent coatings, including electroless nickel, electroplated nickel, and copper. Furthermore, SY‑402 is supplied as a concentrated solution, facilitating easy bath preparation and maintenance. The plating bath is readily rinsed, and the carry‑over of zinc into downstream tanks is minimal, ensuring stable bath control and a broad operating window for process parameters.

SY-401 Activator

Y-401 activator is a direct electroless nickel plating activator for cast aluminum, developed over many years. It is a new, environmentally friendly product—odorless and non‑polluting—that meets advanced domestic and international standards. Compared with the conventional zinc‑depositing process, it not only reduces pollutant emissions and lowers production costs but also improves the first‑pass yield of electroless nickel plating.